FineContrast and DICOM Settings FineContrast function consists of six user-selectable modes, each with different settings for brightness and gamma. It includes two DICOM modes - DICOM-CL and DICOM-BL for clear and blue base film, as well as Custom, sRGB, Calibration, and Text modes. Automatic Mode Switching For further convenience, FineContrast modes can be assigned to any application with the bundled ScreenManager Pro for LCD (for Microsoft Windows XP, 2000, Me and 98SE) utility software. When the application is opened, the screen automatically changes to its assigned mode. ToneCurve Tuning Utility The EIZO-developed bundled software ToneCurve Tuning Utility (for Microsoft Windows XP, 2000, Me and 98SE) uses the monitor's 10-bit look-up tables (LUT) for adjustment of grayscale and color tones to the desired values. Even tones in
high and low brightness areas of the screen, typically problematic for LCD monitors to display, can be adjusted easily and accurately. Backlight Saver With ScreenManager Pro for Medical utility software installed, the Backlight Saver function allows for the monitor's backlight to turn off when the screen saver is activated and the monitor's backlight to turn on when the computer comes out of the screen saver mode. This function helps to reduce power consumption when the monitor is used for a prolonged period of time. | Cabinet Color | | Black, Gray | | Panel | | 54 cm (21.3") TFT Color LCD Panel (IPS) | | Active Display Size (H x V) | | 432.0 x 324.0 mm | | Viewable Image Size | | Diagonal: 540 mm / 21.3" | | Native Resolution | | 1600 x 1200 | | Pixel Pitch | | 0.270 x 0.270 mm | | Display Colors | | 16.77 million from a palette of 1.06 billion | | Viewing Angles (H, V) | | 170°, 170° | | Brightness | | 250 cd/m2 (typical) | | Recommended Brightness for Calibration | | 150 cd/m2 | | Contrast Ratio | | 550:1 | | On/Off Response Time | | 30 ms (typical) | | Scanning Frequency (H, V) | | Analog: 31 - 94 kHz, 49 - 86 Hz (1600 x 1200: 49 - 76 Hz)
Digital: 31 - 76 kHz, 59 - 61 Hz (VGA Text: 69 - 71 Hz)
Frame synchronous mode: 59 - 61 Hz (Not applicable if Screen Size is set to "Normal.") | | Dot Clock | | Analog: 202.5 MHz
Digital: 162 MHz | | Input Signals | | Analog: RGB Analog
Digital: DVI Standard 1.0 | | Sync Formats | | Separate, Composite, Sync-on-Green | | Input Terminal | | D-Sub mini 15 pin, DVI-I 29 pin (switchable) | | USB Ports | | 1 upstream, 2 downstream | | USB Standard | | Standard Rev. 1.1 | | Power Requirements | | AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz | | Power Consumption | | 70 watts | | Power Save Mode | | Less than 8 watts | | Sensor | | Backlight Sensor | | Power Management | | Analog: VESA DPMS
Digital: DVI DMPM | | OSD Languages | | English, German, French, Italian, Japanese, Spanish, Swedish | | Height Adjustment Range | | 82 mm / 3.2" | | Pivot | | 90° | | Tilt / Swivel | | 40° Up, 0° Down / 35° Right, 35° Left | | Dimensions (W x H x D) | | With Stand: 472 x 459 - 541 x 208.5 mm
Without Stand: 472 x 373 x 69 mm | | Net Weight | | With Stand: 10.2 kg
Without Stand: 7.0 kg | | Hole Spacing | | VESA standard (100 x 100 mm) | | Certifications and Standards | | CE (Medical Device Directive), TÜV/GM (EN60601-1), cTÜVus (UL 60601-1,, CSA C22.2 No. 601-1), CB (IEC60601-1), VCCI-B, FCC-B, Canadian ICES-003-B, FDA 510(k)*, CCC, EIZO Eco Products 2002, RoHS | | Supplied Accessories | | AC power cord, user's manual, signal cables (D-Sub mini 15 pin ~ D-Sub mini 15 pin, DVI-D ~ DVI-D, DVI-I ~ D-Sub mini 15 pin), USB cable, EIZO LCD Utility Disk (ScreenManager Pro for LCD, ICC Profile), ToneCurve Tuning Utility, warranty card | | * Display of mammography images for diagnosis is not supported. |
|
Medical Display Solutions 