Increase Productivity while Decreasing Operational Costs
The ability to remotely manage equipment is one of the most critical aspects of modern IT infrastructure. Thinklogical’s PDU 4/4 - Remote Power Distribution Unit offers power management for up to eight devices (computers, hubs, routers, etc.) and works in conjunction with Thinklogical’s Secure Console Servers. The PDU offers effective out-of-band management by enabling users to power cycle, hard boot, and control power to individual servers through console management sessions. Power restarts can be sequenced using programmed time delays to minimize surge or allow drive spin-up time.
The PDU 4/4 has daisy chaining capabilities for easy expansion, and can control up to a maximum of 128 devices. A single serial interface integrates the control of all PDU 4/4s in your application. Port status can be monitored through the rear panel LED’s. In addition, the PDU 4/4 provides port groupings, port specific access rights and password protection,
Each PDU 4/4 utilizes two banks of four outlets; each outlet individually switches and rated at 10 Amperes maximum with each bank at 15 Amperes total. The PDU 4/4 is designed for rack mounting (1U) or desktop. Specifications Storage Temperature 20 to 70°C (-4 to 158°F), 10 to 90% RH, non-condensing Power Supply Voltage 100 to 240 VAC, 50/60 Hz Power Consumption 10 Watts, typical Heat Dissipation 34 BTUs per hour Panel Connectors (2) Power Cords (2) Power Switch/Circuit Breakers (8) AC Power Outlets (8) Port Status LEDs (1) USB (B) - Firmware Upgrade Port (2) Dual RJ45 – Control In/Out Serial Ports Front Panel Display 2 x 24 Liquid Crystal Display Operating Temperature and Humidity 0 to 50 °C (32 to 122 °F); 5 to 95% RH, non-condensing Enclosure Dimensions Approx12.25in x 17.50in x 1.75in high (31.1cm x 44.5cm x 4.4cm high) Weight 11 lb (4.99 kg) Features Eight individually-controlled AC power outlets Dual 15 Amp (max) circuits, four 10A (max) outlets per circuit Redundant DC power supplies for built-in I/O and control circuits Individually programmable Reboot Time Delay on each outlet Solid state zero-crossing relays to minimize power spikes Easily expandable configuration Password Security User-definable Port Names and Port Groups Front panel display for easy system set up and configuration Photos Click on a photo to enlarge.  Remote Power Distribution Unit PDU 4/4
|
| Click on a diagram to enlarge. Back to Top Documentation Ordering The Features
* Eight individually-controlled AC power outlets
* Dual 15 Amp (max) circuits, four 10A (max) outlets per circuit
* Redundant DC power supplies for built-in I/O and control circuits
* Individually programmable Reboot Time Delay on each outlet
* Solid state zero-crossing relays to minimize power spikes
* Easily expandable configuration
* Password Security
* User-definable Port Names and Port Groups
* Front panel display for easy system set up and configuration
Specifications
Storage Temperature 20 to 70°C (-4 to 158°F), 10 to 90% RH, non-condensing Power Supply Voltage 100 to 240 VAC, 50/60 Hz Operating Temp. 0°-50°C; (32°-122°F) Heat Dissipation 34 BTUs per hour Power Consumption 10 Watts, typical Panel Connectors (2) Power Cords (2) Power Switch/Circuit Breakers (8) AC Power Outlets (8) Port Status LEDs (1) USB (B) - Firmware Upgrade Port (2) Dual RJ45 – Control In/Out Serial Ports Front Panel Display 2 x 24 Liquid Crystal Display Enclosure Dimensions Approx 12.25in x 17.50in x 1.75in high (31.1cm x 44.5cm x 4.4cm high) Weight 11 lb (4.99 kg)
|